Kyocera TASKalfa 181 181/221 Operation Guide Rev-2 - Page 224

Troubleshooting Error Message Checkpoints Corrective Actions Reference Page Remove paper from Top tray. Press GO The output tray capacity is exceeded during printing. There are already 250 sheets of paper stored in the output tray. There are already 150 sheets of paper stored in the output tray when the optional job separator is installed. There are already 100 sheets of paper stored in the output tray when the optional finisher is installed. Remove the paper. - Press the Print key. Press U or V to select GO, and then press the Enter key. Printing will resume. Note To cancel printing, select CANCEL, and then press the Enter key. Remove paper from The output tray capacity is Remove the paper. - Top tray. exceeded during copying. Press START key. There are already 250 sheets of paper stored in the output tray. There are already 150 sheets of paper stored in the output tray when the optional job separator is installed. There are already 100 sheets of paper stored in the output tray when the optional finisher is installed. Replace Waste Toner The waste toner box is full. Replace the waste toner box with a 8-9 Box new one. Reposition original or change cassette. [Reposition original or select other paper cassette.] The orientations of the original and the selected paper are different. Change the orientation of the original. - If you press the Start key without changing the orientation, copying will be performed at a 100 % (1:1) magnification ratio. Reset all original in DP. Remove the originals from the optional document processor, return all the originals into the original table, and restart copying. 9-20 Set cassette. [Close paper cassette.] The cassette is not closed First pull it out and push it all the way - securely. back in. 9-10 OPERATION GUIDE