Kyocera TASKalfa 181 181/221 Operation Guide Rev-2 - Page 43
Registering the Subnet Mask, Registering the Default Gateway, Subnet Mask
View all Kyocera TASKalfa 181 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Preparation before Use 10 Press the Enter key. Next, set the subnet mask. Registering the Subnet Mask 2 To register the subnet mask, continue the procedure from step 10 above. TCP/IP Setting DHCP IP Address Subnet Mask 1 Press U or V to select Subnet Mask, and then press the Enter key. Subnet Mask 0. 0. 0. 0 2 Use the same procedure as steps 8 and 9 of IP address setting to input the address. 3 Press the Enter key. Next, set the default gateway. Registering the Default Gateway To register the default gateway, continue the procedure from step 3 above. TCP/IP Setting IP Address Subnet Mask Gateway 1 Press U or V to select Gateway, and then press the Enter key. Gateway 0. 0. 0. 0 2 Use the same procedure as steps 8 and 9 of IP address setting to input the address. 3 Press the Enter key. 4 When you finish making all of the network setting, press the Reset key. The message display returns to the printer basic screen. DHCP Settings Select whether or not to use the DHCP server. The default setting is On. Use the procedure below to specify the DHCP setting. 1 Display the TCP/IP screen referring to steps 1 to 6 of TCP/IP (IPv4) Setup on page 2-11. OPERATION GUIDE 2-11