Kyocera TASKalfa 181 181/221 Operation Guide Rev-2 - Page 172

System Menu 4 Press the Reset key. The message display returns to the copier basic screen. Auto Low Power Time Set the time that elapses before the low power mode is automatically activated. Time that can be set: Inch Specification- 1 to 240 minutes (in 1 minute increments) Metric Specification- 1 to 120 minutes (in 1 minute increments) 1 Display the Machine Default screen. (See How to Display the Machine Default Screen on page 6-13.) Machine Default : Orig. Orient. Sleep Mode Time Low Power Time : Top Edge : 1 Min. : 1 Min. 2 Press U or V to select Low power time, and then press the Enter key. Low Power Mode Time : 1Min. 1-240Min. 3 Press Y or Z to select the desired time from 1 to 240 minutes [1 to 120 minutes], and then press the Enter key. 4 Press the Reset key. The message display returns to the copier basic screen. Copy Output Destination Set the paper output destination with priority for copying. Setting Top tray Finisher Job separator Output destination Output tray of main body Optional finisher Optional job separator NOTE: This item is displayed only if the optional finisher or job separator is installed. 1 Display the Machine Default screen. (See How to Display the Machine Default Screen on page 6-13.) 6-20 OPERATION GUIDE