Kyocera TASKalfa 181 181/221 Operation Guide Rev-2 - Page 177

System Menu 4 Press the Reset key. The message display returns to the copier basic screen. Auto Sleep The machine enters automatically the sleep mode when the preset time elapses without any operation if this setting is turned On. NOTE: This setting is displayed only on the inch specification machine. You can disable the auto sleep function if this function causes inconvenience. It is recommended, however, to set a longer time that elapses before the auto sleep function is activated, before disabling this function. Machine Default : Display Contrast PIN # Change Auto Sleep : : On Auto Sleep : Off * On 1 Display the Machine Default screen. (See How to Display the Machine Default Screen on page 6-13.) 6 2 Press U or V to select Auto Sleep, and then press the Enter key. 3 Press U or V to select Off or On, and then press the Enter key. 4 Press the Reset key. The message display returns to the copier basic screen. Auto Clear You can set the auto clear function (refer to Chapter 1 in Basic Operation Guide, Auto Clear Function) that will be activated when the preset time elapses after copying is complete. 1 Display the Machine Default screen. (See How to Display the Machine Default Screen on page 6-13.) Machine Default : PIN # Change Auto Sleep Auto Clear : On : On 2 Press U or V to select Auto Clear, and then press the Enter key. Auto Clear : Off * On 3 Press U or V to select Off or On, and then press the Enter key. OPERATION GUIDE 6-25