Kyocera TASKalfa 181 181/221 Operation Guide Rev-2 - Page 244
Clearing Staple Jam, Appendix-6, OPERATION GUIDE, Adding Staples
View all Kyocera TASKalfa 181 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 244 highlights
4 While holding the staple holder with one hand and the new staple cartridge with the other hand, insert the cartridge into the holder with care about the direction. NOTE: The arrow on the staple cartridge indicates the insertion direction. 5 Push the staple cartridge all the way into the holder and remove the paper tape around the staple cartridge by pulling it. 6 Insert the staple holder into the insertion slot as it was. Insert it completely until it clicks. Clearing Staple Jam 7 Close the stapler front cover. 1 Remove the staple holder in the same way as A described in Adding Staples. Hold knob A of the face plate of the staple holder with your fingers and raise the plate. Appendix-6 OPERATION GUIDE
Appendix-6
OPERATION GUIDE
4
While holding the staple holder with one hand and
the new staple cartridge with the other hand, insert
the cartridge into the holder with care about the
direction.
NOTE:
The arrow on the staple cartridge indicates the
insertion direction.
5
Push the staple cartridge all the way into the holder
and remove the paper tape around the staple
cartridge by pulling it.
6
Insert the staple holder into the insertion slot as it
was. Insert it completely until it clicks.
7
Close the stapler front cover.
Clearing Staple Jam
1
Remove the staple holder in the same way as
described in
Adding Staples
.
Hold knob A of the face plate of the staple holder
with your fingers and raise the plate.
A