LG 40LV570H INSTALLATION - Page 17
guration Only, RF Con, guration, IP Con
View all LG 40LV570H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
EZ-Manager Wizard (Cont.) (Continued from previous page) Note: For remote management only, select Configuration Only. The TV will search for TV E-Z Installation data downloads; however, Pro:Centric application data will not be downloaded, i.e., Installer Menu item 098 PRO:CENTRIC will be set to 0. EZ-Manager Wizard 1 234 Pro:Centric Manual Configuration Pro:Centric Mode < > Configuration Only Media Type RF Data Channel Signal Strength Signal Quality 1 0% 0% No signal Back Exit Next Pro:Centric Manual Configuration Screen with RF Media Fields Note: By default, the Pro:Centric Manual Configuration screen initially shows RF configuration fields. EZ-Manager Wizard 1 234 Pro:Centric Manual Configuration Pro:Centric Mode Media Type Address Configuration Only < IP > 255 255 255 255 Port 0 Back Exit Next Pro:Centric Manual Configuration Screen with IP Media Fields 3. Refer to the appropriate subsection below, depending on the Pro:Centric server configuration, to complete the remaining fields. RF Configuration a) In the Media Type field, use the Left/Right arrow keys to select RF. b) In the Data Channel field, either key in or use the Left/Right arrow keys to select the RF channel number that will be used by the Pro:Centric server as its data channel. The Data Channel value can be set from 1 to 135. * IP Configuration a) In the Media Type field, use the Left/Right arrow keys to select IP. Note: When you select "IP" as the Media Type, the default Data Channel and Signal Strength/Quality fields are replaced with (IP) Address and Port fields. b) In the Address and Port fields, either key in or use the Left/Right arrow keys to select the appropriate values for the Pro:Centric server IP address and port number. The IP address must match the IPv4 multicast address and the port number must match the port number that is set in the Pro:Centric server. * PCS150R and later Pro:Centric servers do not support HRC or IRC cable channel frequencies. (Continued on next page) 206-4317 Draft A.2 17