LG 40LV570H INSTALLATION - Page 52

Reference: Updating TV/PTC Software using a USB Memory Device This section describes how to update TV (CPU) and/or PTC software using the TV Manager "Update TV Software" and/or "Update PTC Software" option(s), respectively, though you may also use the Ez Download utility to update software, if desired. See "Ez Download Utility" on pages 20 to 22 for further information. Before You Begin • Software update files must be stored in a folder named "LG_DTV" in the root directory of the USB memory device. • Ensure the USB device has been formatted with FAT format. Update the TV/PTC Software Note: You can check the TV/PTC software versions by accessing the Installer Menu with the Installer Remote. See "Accessing the Installer Menu" on page 23 for further information. PTC and CPU versions are displayed in the Installer Menu footer. Note for TV CPU Software Update only: If the TV detects a later version of software on the USB device, it will automatically display a dialog from which you can start the software update immediately. Otherwise, you can close the dialog, and access the TV Manager as described below. 1. Turn ON the TV, and then insert the USB memory device into the TV's USB port. 2. Press MENU SETTINGS on the Installer Remote to display the TV setup menus (TV is in Pass-through Mode) or the Function Menu (TV is not in Pass-through Mode). 3. Use the arrow navigation keys to select/highlight either the Option menu icon from the TV setup menus or the Lock menu icon from the Function Menu. Then, press the number "7" key a total of seven times to access the TV Manager. 4. Use the Up/Down arrow keys to select Update TV Software or Update PTC Software, as applicable, and then press OK. 5. In the next window (TV Software Update or Update PTC Software depending on your selection in step 4-see also screen samples at right), use the Up/ Down arrow keys to select/highlight the update file to download. Then, press OK. Note: Do not select Forced Update options unless you have been specifically instructed to do so or have previous experience with Expert Software Updates. The TV will show update progress in a new window. Do NOT remove the USB device until the software update is complete. When the software update is complete, the TV will briefly display a "Updating complete" window and then automatically reboot. TV Manager USB Ez Download Logo Image Download Update TV Software Update PTC Software Import Clone File Previous OK i TV Software Update (Expert) [ Current TV Software Version Information ] EPK : ##.##.## The following software files are found in the memory card. Select the file you want to download to this TV or press EXIT to cancel the update. EPK: ##.##.## [Forced Update Option] SPI Boot LOGO Image xxLV570H_CPU_SW TV Manager USB Ez Download Logo Image Download Update TV Software Update PTC Software Import Clone File Previous OK Update PTC Software xxLV570H_PTC_SW.txt Previous OK Note: TV Manager / Diagnostics is for service use only. 52 206-4317 Draft A.2