LG 40LV570H INSTALLATION - Page 8
FTG Mode via CPU, FTG Mode via EBL
View all LG 40LV570H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Commercial Mode Overview (Cont.) When the TV CPU is configured with an FTG Channel Map, the CPU controls and restricts the tuning operation of the TV, and when the EBL is configured with an FTG Channel Map, the EBL controls and restricts the tuning operation of the TV. In these models, FTG Mode via CPU also provides the option to select either logical or physical tuning (see note below) during configuration. You must determine which element of the TV will own the FTG Channel Map before you can begin configuration. Note: Logical channel mapping of physical RF channels eliminates dash tuning; for example, physical 19-3 can be mapped to logical channel 9. It also allows physical RF channels and Aux inputs to be listed in any order, not only in physical numeric ascending order. Physical channel tuning requires that you include the dash when direct entering RF channel numbers and Aux inputs (the latter designated by 130-0 through 137-0). FTG Mode via CPU This mode provides the following features: • Logical or physical tuning of physical RF channels and Aux inputs. • Mapping of RF channels with minor (program) numbers up to 999. • FTG Channel Map of up to 600 channels. • Start Channel set for RF or Aux input delivered content. • Pro:Centric data delivery over RF or IP. • TV Zoning option for location-specific configuration. LG's FTG File Manager PC software enables you to create an FTG Configuration (.tlx) file, which may be used to configure the CPU for FTG Mode. You can also create a Clone (.tlx) file from a Master TV Setup that may be used to configure the CPU for FTG Mode. In this mode, the CPU is the owner of the FTG Channel Map and must be configured with an FTG Channel Map and FTG Installer Menu settings using one of the following processes: • Local: Configure an individual LV570H TV via its USB port using a USB memory device / ".tlx" file. The file may be either a Clone file (see "Cloning Procedures" on pages 37 to 40) or an FTG Configuration file (see "FTG File Manager Utilities Overview" on pages 41 to 46). • Remote: Configure all LV570H TVs at the site using a Pro:Centric server head end device (Example: PCS200S). Refer to the Pro:Centric Server Admin Client User Guide for further information. FTG Mode via EBL This mode provides the following features: • Logical tuning of physical RF channels and Aux inputs. • Mapping of RF channels with minor (program) numbers up to 255. • FTG Channel Map of up to 141 logical channels. • Start Channel set for RF or Aux input delivered content. • Pro:Centric data delivery over RF. LG's FTG Device Configuration Application PC software is required to configure the EBL. In this mode, the EBL is the owner of the FTG Channel Map and must be configured with an FTG Channel Map and FTG Installer Menu settings using one of the following processes: • Local: Configure an individual LV570H TV's EBL via its TV-LINK CFG jack using a direct PC-to-TV (EBL) connection and the FTG Device Configuration Application. See Reference section, "FTG Mode via EBL (Local Configuration)," for information on the "Write" process for an FTG Channel Map and FTG Installer Menu settings. • Remote: Configure all LV570H TV EBLs at the site using a Free-To-Guest Management Appliance (FMA) head end device (Example: FMA-LG102). Refer to the Free-To-Guest (FTG) Device Configuration Application User Guide and/or the Installation & Configuration Guide for the FMA device for further information. 8 206-4317 Draft A.2