LG 40LV570H INSTALLATION - Page 19
USB Con, guration via EZ-Manager Wizard, guration
View all LG 40LV570H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
EZ-Manager Wizard (Cont.) (Continued from previous page) • Ensure the USB device to be used has been formatted with FAT format. • When creating files to be downloaded, avoid using special characters (?, &, @, etc.) in filenames. • Refer to "Ez Download Utility" on pages 20 to 22 for further information on the Ez Download utility. • Refer to "Custom Master TV Setup" on pages 34 to 36 for information on creating a Clone (.tlx) file, and/or refer to "Creating an FTG Configuration File" on pages 41 to 46 for information on creating an FTG Configuration (.tlx) file for FTG Mode via CPU configuration. • See Reference section, "Downloading a Splash Screen Image using a USB Memory Device," for splash screen image guidelines. • See Reference section, "Updating TV/PTC Software using a USB Memory Device," for further information on software updates. USB Configuration via EZ-Manager Wizard With either the TV Configuration Options or the Zone, Label, and Room Number screen on display, proceed as follows to configure the TV using the USB memory device. 1. Insert the USB memory device with the appropriate file(s) into the TV's USB port. 2. Use the arrow keys on the Installer Remote to select USB Configuration, and then press OK. You will be redirected to the TV Manager / USB download options. TV Manager USB Diagnostics Ez Download Logo Image Download Update TV Software Update PTC Software Import Clone File Previous OK Note: You can press on the Installer Remote at any time to return to the EZ-Manager Wizard. 3. Select the appropriate option from the TV Manager, and initiate the desired download(s). Update progress will be displayed on the screen. Do NOT remove the USB device while updates are in progress. When the update process is complete, the TV will reboot. Upon restart, depending on the type of update(s) completed, either the EZ-Manager TV Configuration Options screen will be redisplayed (software and/or splash screen image updates only) or the TV will tune according to the Start Channel setting in the Installer Menu (TV configured with Clone/Configuration file). Note: If the TV Configuration Options screen is redisplayed (software and/or splash screen image updates only), you can either proceed with configuration via the EZ-Manager Wizard or exit the EZ-Manager Wizard, as required. 4. Remove the USB memory device, and verify that the appropriate configuration/update(s) is/ are resident on the TV. 206-4317 Draft A.2 19