LG 40LV570H INSTALLATION - Page 26

Installer Menu (Cont.) Installer Menu Items 073 through 122 Item Function 073 CH NOT AVBLE 075 REVERT CH 078 UPN MSB 079 UPN MSB-1 080 UPN MSB-2 081 UPN LSB 082 CHKSM ERROR 083 HANDSHK TIME 084 PERMANENT BLK 086 V. MUTE TIME 087 REAR RGB EN. 088 EN NOISE MUTE 090 KEY LOCK 091 HDMI2 ENABLE 092 HDMI3 ENABLE 093 RJP AVAILABLE 094 SAP MENU EN 096 DEF. ASP. RATIO 097 AUDIO OUTPUT 098 PRO:CENTRIC 099 BACK LIGHTING 102 ATSC BAND 103 ATSC TUNE MODE 104 START MINOR CH 106 ASP RATIO LOCK 107 BANNER SELECT 116 VIDEO MUTE EN 117 FACT DEFAULT 118 POWER SAVINGS 119 DATA CHANNEL 121 UPDATE TIME HR 122 UPDATE TIME MN 26 Value Range 0 / 1 0 / 1 0 - 255 0 - 255 0 - 255 0 - 255 0 / 1 0 - 5 0 / 1 0 - 50 0, 1, 17 0 / 1 0 / 1 0 - 2 0 - 2 0, 1, 2, 5, 6 0 / 1 0 - 4 0 - 9 0 - 2 1 - 202, 255 0 - 4 0 / 1 0 - 255 0 / 1 0 / 1 0 / 1 0 / 1 1, 3, 7 0 - 135, 253, 255 0 - 23, 128 0 - 59 Default Value Brief Description of Function If set to 1 and item 028 CH. OVERIDE is set to 0, a "CHANNEL NOT 0 AVAILABLE" message is displayed if user attempts to direct tune a channel that is not included in the channel lineup. 0 If set to 1 and loss of MPI communication occurs, TV tunes to Start Channel. 0 User programmable number, most significant byte. 0 User programmable number, most significant byte - 1. 0 User programmable number, most significant byte - 2. 0 User programmable number, least significant byte. 1 Enforces rigid MPI checksum. 5 Relaxes MPI timing to be compatible with PC-based Windows-controlled systems. 0 Removes block hours setting for Parental Control and makes block permanent. 0 Use to extend the normal video mute time during channel change. 1 Dependent on item 093 RJP AVAILABLE setting. Set to 0 to disable RGB input. Set to 1 to enable RGB input. Set to 17 for Auto Configure. 1 (Analog channels only) If set to 1, audio is muted if no signal is present. 0 If set to 1, all display panel dome/power button functions are locked. IR is still functional. 1 Set to 0 to disable HDMI 2. Set to 1 (DTV Mode) or 2 (PC Mode), as applicable, to enable HDMI 2. 1 Set to 0 to disable HDMI 3. Set to 1 (DTV Mode) or 2 (PC Mode), as applicable, to enable HDMI 3. 0 Set to 0 to disable. Set to 1, 2, 5, or 6 for HDMI or DVI Mode. (See detailed descriptions.) 1 Set to 1 to enable SAP feature in Function Menu. 2 Sets default aspect ratio at power up. See detailed descriptions and item 106. 7 Set as required in accordance with external audio equipment connected to the TV. See detailed descriptions. 0 Set to 0 to disable Pro:Centric operation. Set to 1 for Flash Mode. Set to 2 for GEM (Java Application) Mode. 255 Sets the level of the TV picture back lighting. (See detailed descriptions.) 4 Selects ATSC band. 1 Set to 1 (default) for Physical Channel scan. Set to 0 for Virtual Channel scan. 0 Selects Minor Start Channel. Set to 0 for NTSC. 0 To retain set aspect ratio on power cycle, set to 1. Set to 0 for default ratio on power cycle. 1 Selects the type of banner to display during channel change. 0 (Analog channels only) If set to 1, video mutes (blank screen) when no signal is present. 0 Set to 1 to restore the factory default settings of all Installer Menu items. 3 Determines the powered status of the embedded b-LAN module and the GAME CONTROL/MPI port. (See detailed descriptions.) Set to 0 to disable. Set from 1 to 135 to match the RF channel number used by 255 the Pro:Centric server as its data channel. Set to 255 to use Auto Search to find the Pro:Centric RF channel. (See detailed descriptions.) 128 Sets the Wake For Update hour. The value "128" is displayed as "OFF." Directly entering 128 turns the Wake For Update feature OFF. 0 Sets the minute for Wake For Update. 206-4317 Draft A.2