LG 40LV570H INSTALLATION - Page 29
EN. CH-T COL. Enable Display Characters Custom Color
View all LG 40LV570H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Installer Menu (Cont.) 031 - POLL RATE MPI Communication Parameter. Selects poll rate for MPI. Step size of 16 ms. Changing from default may affect communication via MPI. 032 - TIMING PULSE MPI Communication Parameter. Sets baud rate for MPI. Step size of 4.3 uS. Changing from default may affect communication via MPI. 046 - STRT AUX SRCE (Start Aux Source) Sets the starting Aux source. When turned ON, the TV will tune to starting Aux source if item 004 STRT CHANNEL is set to 0. 1 = AV 5 = HDMI 2 3 = HDMI 1 7 = HDMI 3 4 = RGB 255 = Last Aux Note: Above is applicable only if all Aux sources are enabled. Note: This item is not available in the Installer Menu unless item 004 STRT CHANNEL is set to 0. 035 - HDMI1 ENABLE Set to 1 to enable HDMI 1 input in DTV Mode. Set to 2 to enable HDMI 1 input in PC Mode. Set to 0 to disable display panel HDMI 1 input. Note: This setting is ignored if item 093 RJP AVAILABLE is set to 1. 039 - REAR AUX EN. (Rear Aux Enable) Set to 1 to enable display panel rear Aux (AV) input. Set to 0 to disable display panel rear Aux (AV) input. 041 - SIMPLINK EN Set to 0 to disable the SIMPLINK feature. Set to 1 to enable SIMPLINK functionality without enabling remote control access to the SIMPLINK Menu. Set to 2 to enable both SIMPLINK functionality and SIMPLINK Menu access, though note that the Speaker menu option will be inaccessible/grayed out. Set to 3 to enable all aspects of SIMPLINK feature and SIMPLINK Menu. If a home theater device is connected to the TV, users can select either the TV or HT (home theater) speaker. Note: When both this item and item 042 AUTO INPUTS are enabled in the Installer Menu, HDMI inputs will be detected by SIMPLINK, but the Auto Input(s) Sensing Feature will not function. 042 - AUTO INPUTS Determines the Aux inputs for which auto-sensing is enabled. Set to 0 to disable auto-sensing for all available inputs. Set to 255 to enable auto-sensing for all available inputs. For information on options for individual input settings, see Reference section, "Auto Input(s) Sensing Feature." Note: In order for auto-sensing to be enabled for an input, that input must also be enabled in the Installer Menu. For example, to enable auto-sensing for HDMI 1, item 035 HDMI1 ENABLE must also be set to 1 or 2. Also, see note above regarding TV operation when both this item and item 041 SIMPLINK EN are enabled. Note: When this item is enabled in the Installer Menu, item 093 RJP AVAILABLE is automatically set to 0. 047 - AUX STATUS Set to 1 for MPI Aux source to be reported as a channel number instead of channel 0. Set to 0 to disable Aux identification change. Controls MPI status channel response for Aux inputs. 053 - DIS. CH-TIME (Disable Channel-Time Display) Set to 1 to disable the TV's native Channel-Time display when a custom channel label/channel information will be provided by the MPI command. Set to 0 to enable the TV's native Channel-Time display. 069 - EN. CH-T COL. (Enable Display Characters Custom Color) Set to 1 to enable custom color for the Channel-Time display. Set to 0 to disable custom color for the Channel-Time display. 070 - FOR. CH-TIME (Display Characters Foreground Color) Set the foreground color for MPI display characters according to the following color chart: 0 = Black 1 = Blue 2 = Green 3 = Cyan 4 = Red 5 = Violet 6 = Yellow 7 = White If the foreground and background colors for the display characters are the same, the background will be transparent. Note: This item and item 071 BCK. CH-TIME also apply to the "Channel Not Available" message if item 073 CH NOT AVBLE is set to 1 (enabled). Note: Items 070 FOR. CH-TIME and 071 BCK. CH-TIME are only available in the Installer Menu when item 069 EN. CH-T COL. is set to 1. 071 - BCK. CH-TIME (Display Characters Background Color) See description for item 070 FOR. CH-TIME above. The color chart is the same for both items. 073 - CH NOT AVBLE (Channel Not Available) If set to 1 and item 028 CH. OVERIDE is set to 0, a "CHANNEL NOT AVAILABLE" message is displayed when a user attempts to direct tune a channel that is not included in the channel lineup. Note: This item is not available in the Installer Menu when item 028 CH. OVERIDE is set to 1. Note: This item is only applicable when the TV is in PTC-CTV Mode. 206-4317 Draft A.2 29