Lexmark MS310 User's Guide - Page 177
Step 3, Step 4, Settings, Paper, Texture, Step 5
View all Lexmark MS310 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
Troubleshooting 177 Action Yes Step 3 Go to step 4. a Depending on your operating system, specify the paper type, texture, and weight from Printing Preferences or the Print dialog. b Resend the print job. No The problem is solved. Is the print still too light? Step 4 Make sure that the paper has no texture or rough finishes. Are you printing on textured or rough paper? Step 5 a Load paper from a fresh package. Note: Paper absorbs moisture due to high humidity. Store paper in its original wrapper until you use it. b Resend the print job. From the Paper Texture Go to step 5. menu, change the texture settings to match the paper you are printing on. To access the Paper Texture menu, do either of the following: • If the printer is on a network, then open a Web browser and type the printer IP address in the address field. Then navigate to Settings > Paper Menu > Paper Texture. Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP address in the TCP/IP section. • If the printer is connected to a computer by a USB or parallel cable, then open the Local Printer Settings Utility for Windows or Printer Settings for Macintosh. Go to step 6. The problem is solved. Is the print still too light?