Netgear FWAG114 FWAG114 Reference Manual - Page 42

Reference Manual for the ProSafe Dual Band Wireless VPN Firewall FWAG114 FEATURE SSID for both 802.11a & 802.11b 11a RF Channel 11b RF Channel WEP Authentication Type Access Point Connections for both 802.11a & 802.11b/g Bridging to wired LAN for both 802.11a & 802.11b/g SSID broadcast for both 802.11a & 802.11b/g DEFAULT FACTORY SETTINGS NETGEAR Off until the Regulatory Domain is selected, then 52 Non-Turbo Mode; 50 Turbo Mode 6 Disabled Open System All wireless stations allowed Enabled Enabled Before You Change the SSID and WEP Settings Take the following steps: For a new wireless network, print or copy this form and fill in the configuration parameters. For an existing wireless network, the person who set up or is responsible for the network will be able to provide this information. Be sure to set the Regulatory Domain correctly as the first step. • SSID: The Service Set Identification (SSID) identifies the wireless local area network. NETGEAR is the default FWAG114 SSID. However, you may customize it by using up to 32 alphanumeric characters. Write your customized SSID on the line below. Note: The SSID in the VPN firewall is the SSID you configure in the wireless adapter card. All wireless nodes in the same network must be configured with the same SSID. 802.11a SSID 802.11b SSID • Authentication The two bands can use different authentication settings. Choose "Shared Key" for more security. 802.11a SSID, circle one: Open System or Shared Key 802.11b SSID, circle one: Open System or Shared Key 4-8 Wireless Configuration