Netgear FWAG114 FWAG114 Reference Manual - Page 49
Using Rules to Block or Allow Specific Kinds of Traffic - default ip
UPC - 606449026955
View all Netgear FWAG114 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Reference Manual for the ProSafe Dual Band Wireless VPN Firewall FWAG114 You may specify one Trusted User, which is a PC that will be exempt from blocking and logging. Since the Trusted User will be identified by an IP address, you should configure that PC with a fixed or reserved IP address. Using Rules to Block or Allow Specific Kinds of Traffic Firewall rules are used to block or allow specific traffic passing through from one side to the other. Inbound rules (WAN to LAN) restrict access by outsiders to private resources, selectively allowing only specific outside users to access specific resources. Outbound rules (LAN to WAN) determine what outside resources local users can have access to. A firewall has two default rules, one for inbound traffic and one for outbound. The default rules of the FWAG114 are: • Inbound: Block all access from outside except responses to requests from the LAN side. • Outbound: Allow all access from the LAN side to the outside. These default rules are shown in the Rules table of the Rules menu in Figure 5-2: Figure 5-2: Rules menu Firewall Protection and Content Filtering 5-3