Netgear WNR1000v3 User Manual - Page 69

Private, Active, Destination IP Address, IP Subnet Mask, Gateway, IP Address, Metric, Apply

Get Netgear WNR1000v3 - Wireless- N Router PDF manuals and user guides View all Netgear WNR1000v3 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 69 highlights

Wireless-N 150 Router WNR1000v3 User Manual 4. Select the Private check box if you want to limit access to the LAN only. If Private is selected, the static route is not reported in RIP. 5. Select the Active check box to make this route effective. 6. In the Destination IP Address field, enter the IP address of the final destination. 7. In the IP Subnet Mask field, enter the IP subnet mask for this destination. If the destination is a single host, enter 255.255.255.255. 8. In the Gateway IP Address field, enter the gateway IP address, which must be a router on the same LAN segment as the WNR1000v3 router. 9. In the Metric field, enter a number between 1 and 15 as the metric value. This represents the number of routers between your network and the destination. Usually, a setting of 2 or 3 works, but if this is a direct connection, set it to 1. 10. Click Apply to have the static route entered into the table. Customizing Your Network Settings v1.0, February 2010 4-10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
Wireless-N 150 Router WNR1000v3 User Manual
Customizing Your Network Settings
4-10
v1.0, February 2010
4.
Select the
Private
check box if you want to limit access to the LAN only. If Private is selected,
the static route is not reported in RIP.
5.
Select the
Active
check box to make this route effective.
6.
In the
Destination IP Address
field, enter the IP address of the final destination.
7.
In the
IP Subnet Mask
field, enter the IP subnet mask for this destination.
If the destination is a single host, enter
255.255.255.255
.
8.
In the
Gateway
IP Address
field, enter the gateway IP address, which must be a router on the
same LAN segment as the WNR1000v3 router.
9.
In the
Metric
field, enter a number between 1 and 15 as the metric value.
This represents the number of routers between your network and the destination. Usually, a
setting of 2 or 3 works, but if this is a direct connection, set it to 1.
10.
Click
Apply
to have the static route entered into the table.