Home » Netgear Manuals » Modems » Netgear WNR1000v3 » Manual Viewer

Netgear WNR1000v3 User Manual - Page 82

Turn UPnP On, Advertisement Period, Advertisement Time To Live, UPnP Portmap Table, Apply - updates

Add to My Manuals
Save this manual to your list of manuals

Page 82 highlights

Wireless-N 150 Router WNR1000v3 User Manual 1. Select UPnP under Advanced the main menu. The UPnP screen displays. Figure 5-7 2. The available settings and information displayed in this screen are: • Turn UPnP On. UPnP can be enabled or disabled for automatic device configuration. The default setting for UPnP is disabled. If this check box is not selected, the router does not allow any device to automatically control the resources, such as port forwarding (mapping) of the router. • Advertisement Period. The advertisement period is how often the router broadcasts its UPnP information. This value can range from 1 to 1440 minutes. The default period is 30 minutes. Shorter durations ensure that control points have current device status at the expense of additional network traffic. Longer durations might compromise the freshness of the device status but can significantly reduce network traffic. • Advertisement Time To Live. The time to live for the advertisement is measured in hops (steps) for each UPnP packet sent. The time to live hop count is the number of steps a broadcast packet is allowed to propagate for each UPnP advertisement before it disappears. The number of hops can range from 1 to 255. The default value for the advertisement time to live is 4 hops, which should be fine for most home networks. If you notice that some devices are not being updated or reached correctly, then it might be necessary to increase this value. • UPnP Portmap Table. The UPnP Portmap Table displays the IP address of each UPnP device that is currently accessing the router and which ports (Internal and External) that device has opened. The UPnP Portmap Table also displays what type of port is open and whether that port is still active for each IP address. 3. Click Apply to save your settings. Fine-Tuning Your Network v1.0, February 2010 5-13

Section	Page
Wireless-N 150 Router WNR1000v3 User Manual	1
Contents	8
About This Manual	12
Chapter 1 Configuring Basic Connectivity	15
Using the Setup Manual	15
Logging In To Your Wireless Router	16
Selecting a Language for Your Screen Display	18
Configuring Your Internet Settings Using the Setup Wizard	20
Viewing and Configuring Basic Internet Settings	20
Your Internet Connection Does Not Require a Login	21
Your Internet Connection Does Require a Login	23
Setting Up and Testing Basic Wireless Connectivity	25
Chapter 2 Safeguarding Your Network	28
Choosing Appropriate Wireless Security	28
Recording Basic Wireless Settings Setup Information	32
Changing Wireless Security Settings	33
Viewing Basic Wireless Settings	33
Configuring WEP Wireless Security	35
Configuring WPA-PSK and WPA2-PSK Wireless Security	37
Viewing Advanced Wireless Settings	38
Using Push 'N' Connect (Wi-Fi Protected Setup)	40
Push Button Configuration	40
Security PIN Entry	42
Configuring the WPS Settings	43
Connecting Additional Wireless Client Devices after WPS Setup	44
Restricting Wireless Access by MAC Address	45
Adding Guest Networks	47
Changing the Administrator Password	49
Backing Up Your Configuration	50
Understanding Your Firewall	50
Chapter 3 Restricting Access From Your Network	52
Content Filtering Overview	52
Blocking Access to Internet Sites	52
Blocking Access to Internet Services	54
Blocking Services by IP Address Range	56
Scheduling Blocking	56
Viewing Logs of Web Access or Attempted Web Access	57
Configuring E-mail Alert and Web Access Log Notifications	58
Setting the Time Zone	59
Chapter 4 Customizing Your Network Settings	60
Using the LAN IP Setup Options	60
Configuring a Device Name	61
Configuring LAN TCP/IP Setup Parameters	61
Using the Router as a DHCP Server	62
Using Address Reservation	63
Using a Dynamic DNS Service	64
Configuring the WAN Setup Options	65
Disabling Port Scan and DoS Protection	65
Setting Up a Default DMZ Server	66
Responding to a Ping on the Internet (WAN) Port	66
Setting the MTU Size	66
Configuring NAT Filtering	67
Configuring Static Routes	67
Chapter 5 Fine-Tuning Your Network	70
Allowing Inbound Connections to Your Network	70
How Your Computer Accesses a Remote Computer through Your Router	71
How Port Triggering Changes the Communication Process	72
How Port Forwarding Changes the Communication Process	74
How Port Forwarding Differs from Port Triggering	75
Configuring Port Forwarding to Local Servers	75
Adding a Custom Service	76
Editing or Deleting a Port Forwarding Entry	77
Configuring Port Triggering	78
Using Universal Plug and Play	81
Optimizing Wireless Performance	83
Using WMM for Wireless Multimedia Applications	84
Quality of Service	84
Using WMM QoS for Wireless Multimedia Applications	85
Configuring QoS for Internet Access	85
Changing the MTU Size	90
Overview of Home and Small Office Networking Technologies	91
Assessing Your Speed Requirements	92
Chapter 6 Using Network Monitoring Tools	94
Viewing Wireless Router Status Information	95
Viewing a List of Attached Devices	100
Managing the Configuration File	100
Backing Up and Restoring the Configuration	101
Erasing the Configuration	101
Updating the Router Firmware	102
Checking for New Firmware in the Router Upgrade Screen	102
Updating Manually to New Router Firmware	103
Enabling Remote Management Access	105
Traffic Meter	107
Chapter 7 Troubleshooting	110
Quick Tips	110
Troubleshooting Basic Functions	111
Login Problems	114
Checking the Internet Service Connection	115
Obtaining an Internet IP Address	115
Troubleshooting PPPoE	116
Troubleshooting Internet Browsing	116
Troubleshooting Your Network Using the Ping Utility	117
Testing the LAN Path to Your Router	117
Testing the Path from Your Computer to a Remote Device	118
Problems with Date and Time	119
Problems with Wireless Adapter Connections	119
Restoring the Default Configuration and Password	121
Appendix A Technical Specifications	122
Default Configuration Settings	122
General Specifications	124
Appendix B Related Documents	125

Match case Limit results 1 per page

Wireless-N 150 Router WNR1000v3 User Manual

Fine-Tuning Your Network

5-13

v1.0, February 2010

Select

UPnP

under Advanced the main menu. The UPnP screen displays.

The available settings and information displayed in this screen are:

•

Turn UPnP On

. UPnP can be enabled or disabled for automatic device configuration.

The default setting for UPnP is disabled. If this check box is not selected, the router does

not allow any device to automatically control the resources, such as port forwarding

(mapping) of the router.

•

Advertisement Period

. The advertisement period is how often the router broadcasts its

UPnP information. This value can range from 1 to 1440 minutes. The default period is 30

minutes. Shorter durations ensure that control points have current device status at the

expense of additional network traffic. Longer durations might compromise the freshness

of the device status but can significantly reduce network traffic.

•

Advertisement Time To Live

. The time to live for the advertisement is measured in hops

(steps) for each UPnP packet sent. The time to live hop count is the number of steps a

broadcast packet is allowed to propagate for each UPnP advertisement before it

disappears. The number of hops can range from 1 to 255. The default value for the

advertisement time to live is 4 hops, which should be fine for most home networks. If you

notice that some devices are not being updated or reached correctly, then it might be

necessary to increase this value.

•

UPnP Portmap Table

. The UPnP Portmap Table displays the IP address of each UPnP

device that is currently accessing the router and which ports (Internal and External) that

device has opened. The UPnP Portmap Table also displays what type of port is open and

whether that port is still active for each IP address.

Click

Apply

to save your settings.

Figure 5-7