Nikon COOLPIX L610 Reference Manual - Page 41
Turning the Camera On and Off, Power Saving Function Auto Off
View all Nikon COOLPIX L610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Turning the Camera On and Off • When the camera is turned on, the power-on lamp (green) lights and then the monitor turns on (the power-on lamp turns off when the monitor turns on). • To turn off the camera, press the power switch. When the camera turns off, the power-on lamp and the monitor turn off. • You can press and hold the c (playback) button to turn on the camera and switch to playback mode. The lens does not extend. The Basics of Shooting and Playback C Power Saving Function (Auto Off) If no operations are performed for a while, the monitor turns off, the camera enters standby mode, and the power-on lamp flashes. If no operations are performed for approx. another three minutes, the camera turns off automatically. While the camera is in standby mode, the monitor turns back on if you perform any of the following operations: ➝ Press the power switch, shutter-release button, A (shooting mode) button, c (playback) button, or b (e movie-record) button • The time that elapses before the camera enters standby mode can be changed using the Auto off setting in the setup menu (A 98). • By default, the camera enters standby mode in about one minute when you are using shooting mode or playback mode. 23