Olympus C 4000 C-4000 Zoom Reference Manual (8.2 MB) - Page 185
POSSIBLE CAUSES, CORRECTIVE ACTION, REF. Picture rotate, Single-frame erase - error code
View all Olympus C 4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
Chapter 11 Troubleshooting (Cont.) POSSIBLE CAUSES CORRECTIVE ACTION REF. PAGE Pictures you have already taken do not appear on the monitor. 1 The camera is in the shooting mode. 2 There is no picture on the card. 3 There is a problem with the card. 4 The camera is connected to a TV. 1 Set the mode dial to . 2 NO PICTURE appears on the monitor. Record pictures. 3 See the error code chart. 4 The monitor does not function when the camera is connected to a TV. P. 117 P. 32, 33, 190 P. 189 P. 140 The viewfinder display is not clear. 1 The diopter is not adjusted properly. 1 Adjust the diopter again. P. 31 The monitor is not clear. 1 The brightness is not adjusted properly. 2 The monitor is exposed to direct sunlight. 1 Adjust the brightness. 2 Block the sunlight or move out of the sunlight. P. 156 - Picture rotate, Picture protect, Single-frame erase, All-frame erase, Print reserve and Card formatting cannot be performed. 1 A write-protect adhesive seal is affixed to the card. 1 Use the card after peeling off the seal. Do not reuse the write protect seal. P. 23 184