Olympus E620 E-620 Instruction Manual (English) - Page 102
Customizing your camera, ISO-AUTO SET, AUTO], HIGH LIMIT], DEFAULT], ISO-AUTO, BULB TIMER, ANTI-
UPC - 050332167322
View all Olympus E620 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
ISO-AUTO SET You can set the upper limit and default ISO values when ISO is set to [AUTO]. [HIGH LIMIT] This sets the upper limit of the ISO value that automatically changes. The upper limit can be set from 200 to 3200 in 1/3 EV increments. [DEFAULT] This sets the value to be normally used when the optimum exposure can be obtained. The value can be set from 200 to 3200 in 1/3 EV increments. ISO-AUTO You can set the shooting mode in which the ISO [AUTO] setting is activated. [P/A/S] The [AUTO] setting is activated in all shooting modes except M mode. When [AUTO] is selected in M mode, ISO 200 is set. [ALL] The [AUTO] setting is activated for all shooting modes. The ISO is automatically selected to obtain the optimal ISO even in M mode. BULB TIMER You can select the maximum time (in minutes) for bulb shooting. ANTI-SHOCK You can select the interval from the time the mirror is raised until the shutter is released from 1 to 30 seconds. This diminishes camera shake caused by vibrations when the mirror moves. This feature can be useful in astrophotography and microscope photography or other photographic situations where a very slow shutter speed is used, and camera vibration needs to be kept to a minimum. x Notes • Anti-shock is added to the shooting functions individually (single-frame shooting, sequential 8 shooting, self-timer shooting, and remote control shooting). g"Sequential shooting" (P. 61) W # CUSTOM Customizing your camera #X-SYNC. You can set the shutter speed that will be used when the flash fires. The speed can be set from 1/60 to 1/180 in 1/3 EV increments. #SLOW LIMIT You can set the slow limit of the shutter speed that will be used when the flash fires. The speed can be set from 1/30 to 1/180 in 1/3 EV increments. w+F When set to [ON], it will be added to the exposure compensation value and flash intensity control will be performed. AUTO POP UP In AUTO or scene mode, the built-in flash pops up automatically in low light or backlight 102 conditions. When set to [OFF], the built-in flash will not pop up automatically. EN