Olympus E620 E-620 Instruction Manual (English) - Page 37

Taking a picture with [IMAGER AF] 1 Press the shutter button halfway. • When the focus is locked, the AF confirmation mark and AF target mark light up. 2 Press the shutter button all the way to take a picture. Taking a picture with [AF SENSOR] 1 Press the shutter button all the way. • The mirror is lowered and the picture is taken after the focus is locked. • The image that was displayed on the monitor before lowering the mirror freezes during focusing. • If correct focus cannot be obtained, you will hear the sound of the shutter but the picture will not be taken. • To focus in advance, hold down the AEL/AFL button and press the shutter button. When the focus is locked, the AF confirmation mark lights up. When the AF confirmation mark is blinking, the focus is not locked. Taking a picture with [HYBRID AF] 1 Press the shutter button halfway. • The Imager AF will be activated and you can check the subject on the LCD monitor. • When the Imager AF achieves approximate focus, the n mark lights up. 2 Press the shutter button all the way. • The picture is taken in a similar way as when using [AF SENSOR]. Shooting while changing the angle of the LCD monitor You can change the angle of the LCD monitor on the camera. This enables you to shoot at an awkward angle while checking the subject's composition on the LCD monitor. • Slowly rotate the LCD monitor within the moveable range. AF confirmation mark 250 F5.6 I-AF 1 LN 38 AF target mark AF confirmation mark 250 F5.6 LN 38 n mark 250 F5.6 o LN 38 Using live view 270° 37 EN