Olympus E620 E-620 Instruction Manual (English) - Page 134

Shooting Viewfinder mode indications Super control panel indications # H $ Flash mode Fill-in flash Fill-in flash (red-eye reduction) Flash off Flash timing Conditions for firing the flash Shutter speed limit 1st curtain Always fires 60 sec. 1/180 sec. k k k Fill-in flash/ S 2nd CURTAIN Slow synchronization 2nd curtain (2nd curtain) M # Manual flash FULL # (FULL) Manual flash Always fires 60 sec. 1/180 sec. 1/4 (1/4) 1st curtain # Manual flash 1/16 (1/16) # Manual flash 1/64 (1/64) *1 When the flash is set to the Super FP mode, it detects backlight with longer duration than for normal flash before emitting light. g"Super FP flash" (P. 80) *2 AUTO, !, # cannot be set in NIGHT+PORTRAIT mode. White balance color temperature The higher the color temperature, the richer the light in bluish tones and the poorer in reddish; the lower the color temperature, the richer the light in reddish tones and the poorer in bluish. The spectral balance of different white light sources is rated numerically by color temperature - concept of physics expressed using the Kelvin (K) temperature scale. The color of sunlight and other natural light sources and the color of a light bulb and other artificial light sources can be expressed in terms of color • The color temperatures for each light source indicated in the above scale are approximate. Information temperature. It follows, then, that the color temperatures of fluorescent lights make them unsuitable as artificial light sources. There are gaps in the hues from the color temperatures of fluorescent light. If these differences in hue are small, they can be calculated with color temperature and 12 this is called correlated color temperature. The 4000K, 4500K and 6600K preset settings in this camera are correlated color temperatures, and should not be considered strictly as color temperatures. Use these settings for shooting conditions under fluorescent lights. 134 EN