Olympus E620 E-620 Instruction Manual (English) - Page 78

Direct button #+F j Super control panel i p: [w] Menu MENU [X] [w] Setting display Viewfinder # button F button j 0.0 RC MODE O+F3F +2 BRACKETING +1 MULTIPLE EXPOSU0RE OF0F 8 O-1N -2 -3 BACK SET 5 x Notes • This does not work during manual flash. • This does not work when the flash control mode on the electronic flash is set to MANUAL. • If flash intensity is adjusted on the electronic flash, it will be combined with the camera's flash intensity setting. • When [w+F] is set to [ON], the flash intensity value will be added to the exposure compensation value. g"w+F" (P. 102) Flash shooting Flash bracketing The camera shoots multiple frames, changing the amount of light emitted by the flash for each shot. The camera shoots 3 frames at a time with the following amount of light: optimum light, light adjusted in the - direction, and light adjusted in the + direction. Menu MENU [X] [BRACKETING] [FL BKT] • The compensation value will change according to the EV step. g"EV STEP" (P. 101) • In single-frame shooting, the amount of light emitted by the flash changes every time the shutter button is pressed. • In sequential shooting, hold down the shutter button until the selected number of frames are taken. • Releasing the shutter button stops flash bracketing shooting. When it stops, 0 blinks in the viewfinder and 0 is displayed in green on the super control panel. BRACKETFINL GBKT AE BKT WB BKT FL BKT ISO BKT OFF 3F 0.3EV 3F 0.7EV 3F 1.0EV BACK SET 78 EN