Olympus E620 E-620 Instruction Manual (English) - Page 107

Lens Data]

Page 107 highlights

x Notes • Depending on the adjustment made, the lens may not focus toward the ) or near side. • When using a teleconverter, the teleconverter and lens are registered as a set. • Only Four Thirds lenses can be registered. [DATA LIST] This displays the lens information registered with [LENS DATA] from [SET AF DATA]. Select a lens from the list, and then check, delete, or edit the registration information. When the same lens is registered multiple times, the adjustment value for the lens with v is applied. DATA LIST 1 14-42 F3.5-5.6 2 14-42 F3.5-5.6 1 12-60 F2.8-4.0 2 12-60 F2.8-4.0 1 50-200 F2.8-3.5 BACK SET Select this to check, delete, or edit the selected lens. Select which lens to use when the same lens is registered multiple times.  TIPS To take pictures while slightly changing the AF adjustment value: j After fine-adjusting the adjustment value, press the shutter button and repeatedly take pictures before pressing the i button. Note the following when taking pictures to check the AF adjustment value. • It is recommended that the record mode be set to a setting higher than YN when taking pictures. • Be careful of camera shake, subject movement, and changes in the distance to the subject when taking pictures. • It is recommended that you take a picture of a subject with strong contrast within approximately 3 m (9.8 ft.) in the actual shooting environment (lighting and temperature). • Avoid taking pictures against backlight. To compare the difference in adjustment values: j You can use light box display to compare adjustment values. The adjustment values are also 8 displayed during light box display. g"Light box display" (P. 83) Customizing your camera To register two types of adjustment values (with the focal point of the lens in front of and behind the subject): j You can register multiple adjustment values for the same lens. Select the adjustment value to be applied during shooting with the [DATA LIST] screen. To register two of the same type of lens individually: j You can individually register multiple numbers of the same type of lens. To specify and register AF targets, or to register the adjustment values for the wide and telephoto directions of the zoom: j On the [LENS DATA SET] screen, press i to make the following settings. • You can specify individual AF targets and adjust each AF target. Normally, the adjustment values for all AF targets are registered. • You can register different adjustment values for the wide and telephoto directions of the zoom. Normally, the adjustment value for the telephoto direction is registered. 107 EN

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156

107
EN
8
Customizing your camera
x
Notes
Depending on the adjustment made, the lens may not focus toward the
)
or near side.
When using a teleconverter, the teleconverter and lens are registered as a set.
Only Four Thirds lenses can be registered.
[DATA LIST]
This displays the lens information registered with
[LENS DATA]
from
[SET AF
DATA]
. Select a lens from the list, and then check, delete, or edit the registration
information.
To take pictures while slightly changing the AF adjustment value:
j
After fine-adjusting the adjustment value, press the shutter button and repeatedly take pictures
before pressing the
i
button.
Note the following when taking pictures to check the AF adjustment value.
It is recommended that the record mode be set to a setting higher than
Y
N when taking
pictures.
Be careful of camera shake, subject movement, and changes in the distance to the subject
when taking pictures.
It is recommended that you take a picture of a subject with strong contrast within approximately
3 m (9.8 ft.) in the actual shooting environment (lighting and temperature).
Avoid taking pictures against backlight.
To compare the difference in adjustment values:
j
You can use light box display to compare adjustment values. The adjustment values are also
displayed during light box display.
g
“Light box display” (P. 83)
To register two types of adjustment values (with the focal point of the lens in front of
and behind the subject):
j
You can register multiple adjustment values for the same lens. Select the adjustment value to be
applied during shooting with the
[DATA LIST]
screen.
To register two of the same type of lens individually:
j
You can individually register multiple numbers of the same type of lens.
To specify and register AF targets, or to register the adjustment values for the wide
and telephoto directions of the zoom:
j
On the
[LENS DATA SET]
screen, press
i
to make the following settings.
You can specify individual AF targets and adjust each AF target. Normally, the adjustment
values for all AF targets are registered.
You can register different adjustment values for the wide and telephoto directions of the zoom.
Normally, the adjustment value for the telephoto direction is registered.
TIPS
1
12-60 F2.8-4.0
2
14-42 F3.5-5.6
1
14-42 F3.5-5.6
2
12-60 F2.8-4.0
1
50-200 F2.8-3.5
DATA LIST
BACK
SET
When the same lens is registered
multiple times, the adjustment
value for the lens with
v
is
applied.
Select which lens to use
when the same lens is
registered multiple times.
Select this to check, delete, or edit
the selected lens.