Olympus E620 E-620 Instruction Manual (English) - Page 80

x Notes • The built-in flash cannot be used when an external flash is attached to the hot shoe. Super FP flash Super FP flash is available with the FL-50R or FL-36R. You can use the Super FP flash even where normal flashes cannot be used with high shutter speed. Fill-in flash shooting with the aperture open (such as in outdoor portrait shooting) is also possible with Super FP flash. For details, refer to the external flash's manual. Super FP flash Viewfinder Shooting with the Olympus wireless RC flash system Wireless flash shooting is possible with the Olympus wireless RC flash system. With this wireless flash system, you can take pictures using multiple wireless flashes and control the flashes in three groups (A, B, and C). The built-in flash is used to communicate between the camera and the external flashes. For details on using the wireless flash, see the manual of the external flash. Wireless flash setup range Position the wireless flash so that the wireless sensor faces the camera. The setup range 5 guidelines are as shown below. The range changes according to the surrounding environment. Flash shooting Remote sensor Direction of the emitted flash Direction of the camera 50° 30° 60° 100° 50° 5m 30° 10m 1 Position the flash while referring to the "Wireless flash setup range", and turn on the flash. 2 Press the MODE button on the flash to set it to RC mode, and set the channel and group of the flash. 3 Set RC mode on the camera to [ON]. • MENU [X] [#RC MODE] [ON] • The super control panel switches to RC mode. 80 • You can press the INFO button to switch the super control panel display. EN