Olympus E620 E-620 Instruction Manual (English) - Page 48

Changing the metering mode There are 5 ways to measure the subject brightness: Digital ESP metering, Center weighted averaging metering, and 3 types of spot metering. Select the most suitable mode for the shooting conditions. Direct button Gj Super control panel i p: [METERING] 2 Menu MENU [c] [V] [METERING] MENU button i button j Setting display Viewfinder G button Exposure G : Digital ESP metering H : Center weighted averaging metering I : Spot metering IJ : Spot metering - highlight control IK : Spot metering - shadow control METERING G Digital ESP metering SELECT SET The camera measures the light levels and calculates the light level differences in 49 separate areas of the image. This mode is recommended for general use. Setting the AF synchronized function to [ESP+AF] enables metering centered around the AF target that is in focus with AF. H Center weighted averaging metering This metering mode provides the average metering between the subject and the background lighting, placing more weight on the subject at the center. Use this mode when you do not want the light level of the background to affect the exposure value. I Spot metering The camera meters a very small area around the center of the subject, defined by the spot metering area mark in the viewfinder. Use this mode when there is very strong backlight. IJ Spot metering - highlight control When the overall background is bright, white areas of the image will come out gray if you use the camera's automatic exposure. Using this mode enables the camera to shift to over-exposure, allowing accurate white reproduction. Metering area is the same as spot metering. : Metering area IK Spot metering - shadow control When the overall background is dark, black areas of the image will come out gray if you use the camera's automatic exposure. Using this mode enables the camera to shift to under-exposure, allowing accurate black reproduction. Metering area is the same as spot metering. 48 EN