Panasonic WVNP472 WVNP472 User Guide - Page 12

OPERATING THE CAMERA You can operate the camera in two ways: from the PC by way of network, or locally from the camera or system device. Access from the PC Your PC can access the camera to view images and to set up menus. Prior to operating from the PC, confirm that connections are made properly as shown in the previous page, CONNECTIONS. 1. Start up the PC. 2. Start up the Web browser, Internet Explorer or Netscape Communicator. 3. Enter the IP address of the camera in the address bar. The camera address is set to 192.168.0.10 at the factory default setting. 4. Press Enter on the keyboard. 5. The main page of the WV-NP472 camera will appear on the display. Preliminary Setup Prior to connection to the system, you need to set up a network address for the camera by one-to-one connection with a PC. Parameters at the factory default are set as follows. IP address: 192.168.0.10 Subnet mask: 255.255.255.0 Gateway: 192.168.0.1 HTTP port number: 80 ALARM IN ALARM OUT AUX OUT DAY/NIGHT IN GND A RCV B VIDEO OUT DC 12V POWER IN 10BASE-T/ 100BASE-TX LINK Network Cable (Cross type) 1. Enter an IP address, "http://192.168.0.10" for example, in the address bar of the browser to display the main page of the WV-NP472 camera. Note: Adobe Acrobat Reader should have been installed on your PC to open the manual. Visit the home pages of Adobe Systems Incorporated. 2. Click the Setup Menu button. The authentication dialog appears. 3. Enter "admin" in the user name line, and you need not enter the password as the default setting. The network setup window appears. -12-