Panasonic WVNP472 WVNP472 User Guide - Page 26
NETWORK SETUP PARAMETERS VS. CONNECTION TYPE, Click the Setup Menu button. The User Setup win
View all Panasonic WVNP472 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
3. Click the Setup Menu button. The User Setup window appears. 4. Click the Network button on top of the screen. The Network Setup window appears. • Enter "admin" in the user name column. • Click the OK button. 5. Set parameters for each item in the Network Setup menu. The parameters differ depending on the connection type. ■ Network Setup Parameters vs. Connection Type Connection type Connection type 1 Item IP address Subnet mask Default gateway Network speed HTTP port Host name DNS Primary server Secondary server DHCP Description of the parameter Enter "192.168.0.XXX" for the IP address (where XXX should be a number from 2 to 254 except the same IP addresses already assigned to the PC and any other cameras). Use the default setting "255.255.255.0" for the subnet mask. No setting required Set the network speed. Use the default setting "auto" for the network speed. Selectable parameters: auto (default setting), 100 Mbps (full duplex), 100 Mbps (half duplex), 10 Mbps (full duplex), 10 Mbps (half duplex) Use the default setting "80" for the HTTP port. No setting required Set to OFF. No setting required Set to OFF. -26-