Panasonic WVNP472 WVNP472 User Guide - Page 9

• Flange-back Adjustment The adjustment is required only when a lens without focus-adjusting mechanism is mounted, or when a lens with adjusting mechanism is mounted and focus that is more accurate is needed. 1. Loosen the flange-back fixing screw on the flangeback adjusting ring. 2. Turn the flange-back adjusting ring to obtain a focused point while watching the monitor screen. 3. Tighten the flange-back fixing screw softly and securely. Note: The object may be out of focus when using a source of near-infrared light rather than using the visible light. CP470 Mounting the Camera The mounting adapter can be secured on either the top or bottom (at the factory shipment) of the camera. The mounting hole is a standard photographic pan-head screw size (1/4"-20). Camera-mounting bracket (Locally procured) • Mounting from the Top 1. Remove the mounting adapter from the bottom of the camera. 2. Attach the mounting adapter on top of the camera as shown in the figure. Fixing Screws Mounting Adapter WV-NP472 3. Secure the camera to the camera-mounting bracket (locally procured), referring to the manual included with the bracket. Note: Use the original two screws to attach the mounting adapter on the camera. Using shorter ones may cause the camera to fall down, or longer ones may damage the inside of the camera. Adapter on the bottom at the factory shipment • Mounting from the Bottom 1. Secure the camera on the camera-mounting bracket (locally procured), referring to the manual included with the bracket. • Pictures Upside-down You can reverse the picture upside-down in the menu setup when it is necessary. Note: The right and left of the picture are not reversed. -9-