Panasonic WVNP472 WVNP472 User Guide - Page 23

SETUP FROM THE PC PREPARATIONS FOR THE PC ■ Connections Prior to connections, specify the connection type and prepare relevant devices and cables. Notes: • We recommend that you use connection type 1 or type 2 when setting up the network address of the camera. • Be sure to unplug or switch all the devices off, then start connections. ● Direct Connection to PC (Type 1) Use a cross-type network cable in the category 5 to connect the camera directly with the PC. ALARM IN ALARM OUT AUX OUT DAY/NIGHT IN GND A RCV B VIDEO OUT DC 12V POWER IN 10BASE-T/ 100BASE-TX LINK Network Cable (Cross type) PC Necessaries: Cross-type network cable (Category 5) ● Connection to Intranet (Type 2) A switching hub connected to the intranet is placed between the camera and the PC. ALARM IN ALARM OUT AUX OUT DAY/NIGHT IN GND A RCV B VIDEO OUT DC 12V POWER IN 10BASE-T/ 100BASE-TX LINK Network Cable (Straight type) Switching Hub PC (16 clients maximum) Necessaries: • Straight-type network cable (Category 5) • Switching hub or router (10BASE-T/100BASETX applicable) ● Connection to Internet (Type 3) The PC accesses the camera through the Internet and the DSL/CATV modem. ALARM IN ALARM OUT AUX OUT DAY/NIGHT IN GND A RCV B VIDEO OUT DC 12V POWER IN 10BASE-T/ 100BASE-TX LINK Network Cable (Straight type) Internet DSL/CATV Modem PC (16 clients maximum) Necessaries: • Straight-type network cable (Category 5) • CATV modem (cable modem) or DSL modem ● Connection to Internet (Type 4) A switching hub or a router may be added to type 3 connection. ALARM IN ALARM OUT AUX OUT DAY/NIGHT IN GND A RCV B VIDEO OUT DC 12V POWER IN 10BASE-T/ 100BASE-TX LINK Network Cable (Straight type) Switching Hub or Router PC (16 clients maximum) Internet DSL/CATV Modem Necessaries: • Straight-type network cable (Category 5) • CATV modem (cable modem) or DSL modem • Switching hub or router (10BASE-T/100BASETX applicable) Notes: • Setting the router is required when connecting more than one camera. Refer to the manual included with the router. • The camera does not support the PPPoE. Use a router that handles PPPoE when connecting the camera using that protocol. • A global-type IP address is required when connecting via the Internet. -23-