Ricoh Aficio MP 7000 Copy/Document Server Reference - Page 55

Copying from the Bypass Tray Copying from the Bypass Tray The bypass tray allows you to copy non-standard paper. Important ❒ The Duplex function cannot be performed on paper fed from the bypass tray. If [1 Sided→2 Sided] is selected, cancel the setting. You can also change the initial settings. You can change the initial settings. See "Programming Defaults 2 in Initial Display". ❒ Paper has a vertical length of 100-305 mm (3.9-12 inches) and a horizontal length of 139.7-600 mm (5.5-23.6 inches) can be copied from the bypass tray. ❒ The machine can automatically detect the following sizes as standard size copy paper: • Metric version: A3L, A4L, A5L • Inch version: A3L, 11" × 17"L, 81/2" × 14"L, 51/2" × 81/2"L ❒ If you want to use the size of paper other than the above, be sure to specify the size. ❒ When copying on OHP transparencies or paper heavier than 105 g/m2 (about 27.9 lb.), you need to specify the type and size of paper with "Special Original". ❒ The maximum number of sheets you can load into the bypass tray depend on paper type. Load only as much paper as can be held between the paper guides on the bypass tray. ❒ When paper larger than 433 mm (17.1 inches) in size is used, the paper may become wrinkled, may not be fed into the machine, or may cause paper jams. ❒ When copying onto special paper such as adhesive labels, always select "Face Up". If you select "Face Down", a paper misfeed may occur. ❒ If you place originals on the exposure glass and want the copies to be delivered face down, select "Face Down" for both "Copy Eject Face Method in Glass Mode" and "Copy Eject Face Method in Bypass Mode" of User Tools. ❖ [Bypass Tray Usage] Press [Bypass Tray Usage] to display a description on using the bypass tray. 37