Samsung SGH-I747 User Manual Ver.lem_f5 (English(north America)) - Page 156

5. Tap Save to store the new information and connect to your target WAP. Note: The next time your device connects to a previously accessed or secured wireless network, you are not prompted to enter the WAP key again, unless you reset your device back to its factory default settings. Turning Wi-Fi Off 1. From the Home screen, tap ➔ Settings. 2. Tap the ON/OFF slider, located to the right of the Wi-Fi field, to turn Wi-Fi OFF OFF . Note: Use of wireless data connections such as Wi-Fi and Bluetooth can cause an added drain to your battery and reduce your use times. Manually Scan for a Wi-Fi Network 1. From the Home screen, tap ➔ Settings ➔ Wi-Fi. 2. Tap Scan. All available Wi-Fi networks are displayed. 150 Wi-Fi Status Indicators The following icons show your Wi-Fi connection status at a glance: Displays when Wi-Fi is connected, active, and communicating with a Wireless Access Point (WAP). Displays when Wi-Fi is active but there is a communication issue with the target Wireless Access Point (WAP). Displays when connected to another device using Wi-Fi Direct. For more information, refer to "Wi-Fi Direct" on page 151. Wi-Fi Advanced Settings The Wi-Fi settings - Advanced menu allows you to set up many of your device's Wi-Fi service, including: • Network notification when an open network is available • Setting your Wi-Fi sleep policy • Checking for Wi-Fi Internet service • Automatically connecting to an AT&T Wi-Fi hotspot when detected • Specifying your Wi-Fi frequency band • Viewing your device's MAC and IP Address