SanDisk SDCFH-004G Product Manual - Page 45
ATA Register Set and Protocol
UPC - 878587001044
View all SanDisk SDCFH-004G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
CHAPTER 4 ATA Register Set and Protocol SanDisk CompactFlash Memory cards can be configured as a high performance I/O device through the following ways: • Standard PC-AT disk I/O address spaces 1F0h-1F7h, 3F6h-3F7h (primary); 170h-177h, 376h-377h (secondary) with IRQ 14 (or other available IRQ). • Any system decoded 16-byte I/O block using any available IRQ. • Memory space. The communication to or from the card is done using the Task File registers, which provide all the necessary registers for control and status information. The PCMCIA interface connects peripherals to the host using four register mapping methods. Table 4-1 is a detailed description of these methods. Table 4-1 Standard I/O Configurations Config Index 0 1 I/O or Memory Memory I/O Address 0-F, 400-7FF XX0-XXF 2 I/O 1F0-1F7, 3F6-3F7 2 I/O 1F0-1F7, 3F6-3F7 3 I/O 170-177, 376-377 3 I/O 170-177, 376-377 Drive 0 0 0 1 0 1 Description Memory Mapped I/O Mapped 16 Contiguous Registers Primary I/O Mapped Drive 0 Primary I/O Mapped Drive 1 Secondary I/O Mapped Drive 0 Secondary I/O Mapped Drive 1 4.1 I/O Primary and Secondary Address Configurations Table 3-2 contains configurations for primary and secondary I/O decoding. Table 4-2 Primary and Secondary I/O Decoding -REG A9-A4 A3 A2 A1 A0 -IORD=0 -IOWR=0 0 1F(17) 0 0 0 0 Even RD Dataa,b Even WR Dataa,b 0 1F(17) 0 0 0 1 Error Registera Featuresa 0 1F(17) 0 0 1 0 Sector Count Sector Count 0 1F(17) 0 0 1 1 Sector No. Sector No. 0 1F(17) 0 1 0 0 Cylinder Low Cylinder Low 0 1F(17) 0 1 0 1 Cylinder High Cylinder High 0 1F(17) 0 1 1 0 Select Card/Head Select Card/Head 0 1F(17) 0 1 1 1 Status Command 0 3F(37) 0 1 1 0 Alt Status Device Control 0 3F(37) 0 1 1 1 Drive Address Reserved © 2007 SanDisk Corporation 4-1 Rev. 12.0, 02/07