Sony RDR-HX900 Operating Instructions - Page 103
About i.LINK, About the name i.LINK - specifications
UPC - 027242644328
View all Sony RDR-HX900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Outputs (Jack name: Jack type/output level/output impedance) LINE OUT 1/2 (AUDIO): Phono jack/2 Vrms/10 kilohms (VIDEO): Phono jack/1.0 Vp-p (S VIDEO): 4-pin mini DIN/Y:1.0 Vp-p, C: 0.286 Vp-p DIGITAL OUT (OPTICAL): Optical output jack/-18 dBm (wave length: 660 nm) DIGITAL OUT (COAXIAL): Phono jack/0.5 Vp-p/75 ohms COMPONENT VIDEO OUT (Y, PB, PR): Phono jack/Y: 1.0 Vp-p/PB, PR: interlace*=0.648 Vp-p, progressive or interlace**=0.7 Vp-p * "Y/Pb/Pr Out Black Level" is "On" ** "Y/Pb/Pr Out Black Level" is "Off" SET TOP BOX CONTROL: Mini jack General Power requirements: 120 V AC, 60 Hz Power consumption: 54 W Dimensions (approx.): 430 × 89 × 346 mm (17 × 3 5/8 × 13 5/8 in.) (width/height/depth) incl. projecting parts Hard disk drive capacity: 160 GB Mass (approx.): 5.9 kg (13.01 lb) Operating temperature: 5 ºC to 35 ºC (41 ºF to 95 ºF) Operating humidity: 25 % to 80 % Supplied accessories: Audio/video cord (1) Power cord (1) Antenna cable (1) Set top box controller (1) Remote commander (remote) (1) Size AA(R6) batteries (2) Specifications and design are subject to change without notice. About i.LINK The DV IN jack on this recorder is an i.LINKcompliant DV IN jack. This section describes the i.LINK standard and its features. What is i.LINK? i.LINK is a digital serial interface for handling digital video, digital audio and other data in two directions between equipment having the i.LINK jack, and for controlling other equipment. i.LINK-compatible equipment can be connected by a single i.LINK cable. Possible applications are operations and data transactions with various digital AV equipment. When two or more i.LINKcompatible equipment are connected to this recorder in a daisy chain, operations and data transactions are possible with not only the equipment that this recorder is connected to but also with other devices via the directly connected equipment. Note, however, that the method of operation sometimes varies according to the characteristics and specifications of the equipment to be connected, and that operations and data transactions are sometimes not possible on some connected equipment. Note Normally, only one piece of equipment can be connected to this recorder by the i.LINK cable (DV connecting cable). When connecting this recorder to i.LINKcompatible equipment having two or more i.LINK jacks (DV jacks), see the instruction manual of the equipment to be connected. About the name "i.LINK" i.LINK is a more familiar term for IEEE 1394 data transport bus proposed by SONY, and is a trademark approved by many corporations. IEEE 1394 is an international standard standardized by the Institute of Electrical and Electronics Engineers. Additional Information ,continued 103