Sony RDR-HX900 Operating Instructions - Page 90
Audio ATT attenuation, Audio DRC Dynamic Range Control DVDs, Downmix DVDs only, Digital Out
UPC - 027242644328
View all Sony RDR-HX900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Audio ATT (attenuation) If the playback sound is distorted, set this item to "On." The recorder reduces the audio output level. This function affects the output of the following jacks: - LINE OUT (AUDIO L/R) 1/2 jacks On Select this when the playback sound from the speakers is distorted. Off Normally select this position. Audio DRC (Dynamic Range Control) (DVDs only) Makes the sound clear when the volume is turned down when playing a DVD that conforms to "Audio DRC." This affects the output from the following jacks: - LINE OUT (AUDIO L/R) 1/2 jacks - DIGITAL OUT (OPTICAL or COAXIAL) jack only when "Dolby Digital" is set to "D-PCM." Standard TV Mode Wide Range Normally select this position. Makes low sounds clear even if you turn the volume down. Gives you the feeling of being at a live performance. Downmix (DVDs only) Switches the method for mixing down to two channels when you play a DVD which has rear sound elements (channels) or is recorded in Dolby Digital format. For details on the rear signal components, see "Checking the Play Information and Playing Time" (page 41). This function affects the output of the following jacks: - LINE OUT (AUDIO L/R) 1/2 jacks - DIGITAL OUT (OPTICAL or COAXIAL) jack when "Dolby Digital" is set to "D-PCM." Dolby Surround Normal Normally select this position. Multi-channel audio signals are output to two channels for enjoying surround sounds. Multi-channel audio signals are downmixed to two channels for use with your stereo. Digital Out Selects if audio signals are output via the DIGITAL OUT (OPTICAL or COAXIAL) jacks. On Normally select this position. When you select "On," see "To set the digital output signal" for further settings. Off The influence of the digital circuit upon the analog circuit is minimal. ◆To set the digital output signal The following setup items switch the method of outputting audio signals when you connect a component such as an amplifier (receiver) with a digital input jack. For connection details, see "Connecting the Audio Cords" (page 19). Select "Dolby Digital" and "DTS" after setting "Digital Out" to "On." SETUP Settings Video Audio Features Options Easy Setup Auto Stereo : Tuner Audio : Audio ATT : Audio DRC : Downmix : Digital Out : Dolby Digital : DTS : On Main Off Standard Dolby Surround On D-PCM Off 90