Sony STR-DN1030 Operating Instructions (Large File - 11.51 MB) - Page 117
Additional Information, The surround effect cannot
View all Sony STR-DN1030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
• Set the image resolution of the playback equipment to more than 720p/1080i to enjoy High Bitrate Audio (DTS-HD Master Audio, Dolby TrueHD). • The image resolution of the playback equipment may need to be at certain settings before you can enjoy Multi Channel Linear PCM. Refer to the operating instructions of the playback equipment. • Make sure the TV is compatible with the System Audio Control function. • If the TV does not have System Audio Control function, set the "Audio Out" settings in HDMI Settings menu to - "TV+AMP" if you want to listen to the sound from the TV speaker and receiver. - "AMP" if you want to listen to the sound from the receiver. • When you connect the receiver to a video equipment (projector, etc.), sound may not be output from the receiver. In this case, set the "Audio Out" to "AMP" in the HDMI Settings menu (page 98). • If you cannot listen to the sound of the equipment connected to the receiver while TV input is selected on the receiver - Be sure to change the input of the receiver to HDMI when you want to watch a program on the equipment connected via HDMI connection to the receiver. - Change the TV channel when you want to watch a TV broadcast. - Be sure to select the correct equipment or input you want when you watch a program from the equipment connected to the TV. Refer to the operating instructions of the TV on this operation. • Check that the "A. DIRECT" is not being used. • When using the Control for HDMI function, you cannot control the connected equipment using TV's remote control. - Depending on the connected equipment and TV, you may need to set up the equipment and TV. Refer to the operating instructions supplied with each equipment and TV. - Change the input of the receiver to the HDMI input connected to the equipment. • Check that the selected digital audio input jack is not reassigned to other inputs (page 88). The left and right sounds are unbalanced or reversed. • Check that the speakers and equipment are connected correctly and securely. • Adjust the sound level parameters using the Speaker Settings menu. Dolby Digital or DTS multi channel sound is not reproduced. • Check that the DVD, etc. you are playing is recorded in Dolby Digital or DTS format. • When connecting the DVD player, etc., to the digital input jacks of this receiver, make sure the digital audio output setting of the connected equipment is available. • Set "Audio Out" to "AMP" in the HDMI Settings menu (page 98). • You can enjoy High Bitrate Audio (DTSHD Master Audio, Dolby TrueHD), Multi Channel Linear PCM only with an HDMI connection. The surround effect cannot be obtained. • Make sure you have selected the sound field for movie or music (page 61, 62). • Sound fields do not function when DTS-HD Master Audio, DTS-HD High Resolution Audio or Dolby TrueHD with sampling frequency of more than 48 kHz are being received. Additional Information continued 117US