Sony STR-DN1030 Operating Instructions (Large File - 11.51 MB) - Page 12
Dolby Pro Logic indicator, Lights up when the A.P.M. Automatic Phase - settings
View all Sony STR-DN1030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
P DTS(-ES) indicator* Lights up the respective indicator when the receiver is decoding the corresponding DTS format signals. DTS DTS-ES DTS 96/24 DTS DTS-ES DTS 96 kHz/24 bit Q Tuning indicator Lights up when the receiver tunes to a radio station. MEM Memory function, such as Preset Memory (page 60), etc., is activated. ST Stereo broadcast R S.OPT. Lights up when Sound Optimizer function is activated (page 64). S A.P.M. Lights up when the A.P.M. (Automatic Phase Matching) function is activated. You can only set the A.P.M. function in the DCAC (Digital Cinema Auto Calibration) function (page 42). T EQ Lights up when the equalizer is activated. U D.RANGE Lights up when dynamic range compression is activated (page 96). V D.C.A.C. Lights up when the measurement results of the "Auto Calibration" function are applied. W UPDATE Lights up when a new software is available (page 77). X Dolby Pro Logic indicator Lights up the respective indicator when the receiver performs Dolby Pro Logic processing. This matrix surround decoding technology can enhance input signals. PL PL II PL IIx PL IIz Dolby Pro Logic Dolby Pro Logic II Dolby Pro Logic IIx Dolby Pro Logic IIz Note These indicators may not light up depending on the speaker pattern setting. Y Lights up when the disc being played back contains an LFE (Low Frequency Effect) channel and the LFE channel signal is actually being reproduced. Z Playback channel indicator The letters (L, C, R, etc.) indicate the channels being played back. Based on the speaker settings, the box around the letter(s) vary to show how the receiver downmixes the source sound. LH RH L R C SL SR S SBL SBR SB Front Left High Front Right High Front Left Front Right Center (monaural) Surround Left Surround Right Surround (monaural or the surround equipment obtained by Pro Logic processing) Surround Back Left Surround Back Right Surround Back (the surround back equipment obtained by 6.1 channel decoding) Example: Speaker pattern: 3/0.1 Recording format: 3/2.1 Sound Field: A.F.D. AUTO * When playing a Dolby Digital or DTS format disc, make sure that you have completed the digital connections and that INPUT MODE is not set to "ANALOG" (page 88) or "A. DIRECT" is not selected. 12US