Sony STR-DN1030 Operating Instructions (Large File - 11.51 MB) - Page 64
Using the Sound Optimizer function, Using the Advanced Auto Volume function - dolby digital plus
View all Sony STR-DN1030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Using the Sound Optimizer function The Sound Optimizer lets you enjoy clear and dynamic sound at low volume levels. It automatically calibrates the sound which cannot be heard well when you turn down the volume level. After Auto Calibration is performed, the sound level is optimized to suit your environment. SOUND OPTIMIZER Using the Advanced Auto Volume function This receiver can adjust the volume automatically depending on the input signal or content from the connected equipment. This function is useful, for example, when the sound of a commercial is louder than the TV programs. AMP Press SOUND OPTIMIZER to select "S. OPT. ON". The Sound Optimizer function is activated. The Sound Optimizer is set to on and off as you press SOUND OPTIMIZER. Note This function does not work when "A. DIRECT" is being used. AUTO VOL Press AMP, then press AUTO VOL to select "A. VOL ON". The Advanced Auto Volume function is set to on and off as you press AUTO VOL. Notes • Be sure to reduce the volume level before you turn on/off this function. • As this function is available only when Dolby Digital, DTS or Linear PCM signals are input, the sound may suddenly increase when you switch to other formats. • This function does not work in the following cases. - Linear PCM signals with a sampling frequency of more than 48 kHz are being received. - Dolby Digital Plus, Dolby TrueHD, DTS 96/24, DTS-HD Master Audio, or DTS-HD High Resolution Audio signals are being received. 64US