Sony STR-DN1030 Operating Instructions (Large File - 11.51 MB) - Page 128
iPod/iPhone USB NETWORK General - parts
View all Sony STR-DN1030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
iPod/iPhone section DC 5V 1.0 A MAX USB section Supported bit rate* MP3 (MPEG 1 Audio Layer-3): 32 kbps - 320 kbps, VBR WMA: 48 kbps - 192 kbps AAC: 48 kbps - 320 kbps * Compatibility with all encoding/writing software, recording devices and recording media cannot be guaranteed. Transfer speed Full-speed Supported USB device Mass Storage Class Maximum current 500 mA NETWORK section Ethernet LAN 10BASE-T/100BASE-TX Wireless LAN Compatible standards: IEEE 802.11 b/g Security: WEP 64 bit, WEP 128 bit, WPA/WPA2-PSK (AES), WPA/WPA2-PSK (TKIP) Radio frequency: 2.4 GHz Bluetooth section Communication system Bluetooth Specification version 2.1 + EDR (Enhanced Data Rate) Output Bluetooth Specification Power Class 2 Maximum communication range Line of sight approx. 10 m1) Frequency band 2.4 GHz band (2.4000 GHz - 2.4835 GHz) Modulation method FHSS (Freq Hopping Spread Spectrum) Compatible Bluetooth profiles2) A2DP (Advanced Audio Distribution Profile) AVRCP 1.3 (Audio Video Remote Control Profile) Supported Codecs3) SBC4) Transmission range (A2DP) 20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz) 1)The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone, reception sensitivity, antenna's performance, operating system, software application, etc. 2)Bluetooth standard profiles indicate the purpose of Bluetooth communication between devices. 3)Codec: Audio signal compression and conversion format 4)Subband Codec General Power requirements Area Power requirements USA, Canada 120 V AC, 60 Hz Mexico 127 V AC, 60 Hz Brazil 127 V AC - 220 V AC, 60 Hz Power consumption 240 W Power consumption (during standby mode) 0.3 W (When Control for HDMI, Network Standby, and Bluetooth Standby are set to off, and the receiver in zone 2 is turned off.) Dimensions (width/height/depth) (Approx.) 430 mm × 158 mm × 322.6 mm (17 in × 6 1/4 in × 12 3/4 in) including projecting parts and controls Mass (Approx.) 8.8 kg (19 lb 7 oz) Design and specifications are subject to change without notice. Halogenated flame retardants are not used in the certain printed wiring boards. 128US