Tripp Lite SU1500XLCD Owner's Manual for On-Line Tower LCD UPS 933168 - Page 27
Internal Battery Replacement
View all Tripp Lite SU1500XLCD manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Internal Battery Replacement See the following diagrams for battery removal and installation procedures. SU1000XLCD 1a Remove the screw from the left of the front bezel. 1b Remove the front bezel. 1a 1b 2 Flip open the white connector holder. Disconnect the connector that's inside the white connector holder. 3 Remove the screw that holds the metal bar in place (in front of the battery compartment on the left side). Remove the metal bar from the UPS. 3 2-3 4 Remove the batteries using the pull tab. Note: Please memorize the original battery position and orientation to ensure that you install the new batteries correctly. 5 Insert the new battery set into the UPS in the same position as the original set. 6 Replace the metal bar. Reinstall the screw on the right side that holds the metal bar in place. 7 Reconnect the DC connector (red-to-red, black-to-black) and flip the white connector holder closed. Close the white connector holder. 8 Reinstall the front bezel and replace the screw on the left of 4 the bezel to secure it to the cabinet. 27 13-03-138 93-3168-EN.indd 27 2 3/28/2013 1:05:47 PM