Xerox 3100MFP/S Analog Telephone Adapter User Guide - Page 10
Sagem Fax ATA 101S to a specific IP terminal IPBX, VoIP gateway - windows 8
UPC - 095205741988
View all Xerox 3100MFP/S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Sagem_Fax_ATA101S.book Page 6 Jeudi, 21. février 2008 5:09 17 Step 3 - SIP Configuration > SIP general > Tel to IP routing table menu If you do not use a proxy, you can set up the routing tables via this menu. The routing tables of the Sagem Fax ATA 101S allow you to create a routing of type "Tel to IP". Route the call coming from the analog terminal connected to the Sagem Fax ATA 101S to a specific IP terminal (IPBX, VoIP gateway, IP telephone, IP fax machine, etc.) according to the dialled number prefix. 1. To create a routing table click on Add. The following window is displayed: 1. In the Speed dial field, enter the code used to detect the routing table to be used when the user dials a number starting with this code. This code can contain one to three digits. 2. In the User name and IPv4 addr fields, enter the information relating to the VoIP peripheral to which the call is to be routed. You can also define the communication port (the ATA default port proposed is the port normally used by the SIP protocol). 3. To validate, click on Add. The new routing rule is then created. 6 Sagem Fax ATA 101S