Xerox 3100MFP/S Analog Telephone Adapter User Guide - Page 7

Accessing the Web setup interface

Get Xerox 3100MFP/S - Phaser B/W Laser PDF manuals and user guides
UPC - 095205741988
View all Xerox 3100MFP/S manuals
Add to My Manuals
Save this manual to your list of manuals

Page 7 highlights

ENG Sagem_Fax_ATA101S.book Page 3 Jeudi, 21. février 2008 5:09 17 INSTALLATION AND MANUAL SETUP (VIA THE WEB SETUP INTERFACE) When you do not have many units to set up, it is recommended to set up the ATA through the Web interface. This setup mode allows you to set up your Sagem Fax ATA 101S simply and quickly. Note This method is recommended when installing and setting up 1 to 10 units. Accessing the Web setup interface 1. Connect the LAN RJ45 connector located at the rear of the unit directly to your computer via a crossed cable, or to a Hub/Switch via a straight cable. Important Make sure to use a Hub/Switch that is not connected to your computer network. This will avoid any IP address conflicts. 2. Set up your network card so that it is located in the same IP network as the LAN connection socket of your Sagem Fax ATA 101S. You can use the following default IP settings: • IP address: 192.168.134.10 • Sub-network mask: 255.255.255.0 • Default gateway: blank User guide 3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
User guide
3
ENG
I
NSTALLATION
AND
MANUAL
SETUP
(
VIA
THE
W
EB
SETUP
INTERFACE
)
When you do not have many units to set up, it is recommended to set
up the ATA through the Web interface. This setup mode allows you to
set up your Sagem Fax ATA 101S simply and quickly.
Accessing the Web setup interface
1.
Connect the
LAN
RJ45 connector located at the rear of the unit
directly to your computer via a crossed cable,
or
to a Hub/Switch
via a straight cable.
2.
Set up your network card so that it is located in the same IP
network as the LAN connection socket of your Sagem Fax ATA
101S.
You can use the following default IP settings:
•
IP address:
192.168.134.10
•
Sub-network mask: 255.255.255.0
•
Default gateway:
blank
Note
This method is recommended when installing and
setting up 1 to 10 units.
Important
Make sure to use a Hub/Switch that is not
connected to your computer network. This will
avoid any IP address conflicts.
Sagem_Fax_ATA101S.book
Page 3
Jeudi, 21. février 2008
5:09 17