Xerox 3100MFP/S Analog Telephone Adapter User Guide - Page 5
Guide - manual
UPC - 095205741988
View all Xerox 3100MFP/S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
ENG Sagem_Fax_ATA101S.book Page 1 Jeudi, 21. février 2008 5:09 17 USER GUIDE WHAT IS AN ATA (ANALOG TELEPHONE ADAPTER)? The Sagem Fax ATA 101S is a voice over IP gateway allowing you to connect analog terminals (fax machine, telephone, etc.) to a voice over IP infrastructure (IP operator, IPPBX or VoIP gateway). Through the Sagem Fax ATA 101S, you can continue to use your analog telecommunications peripherals via your voice over IP telephone architecture. RECOMMENDATIONS AND FACTORY SETTINGS Make sure to reserve an IP bandwidth sufficient to provide transmission quality. The bandwidth to be reserved depends on the codec you use: • G711: 64 Kbps • G729: 8 Kbps • T.38: up to 14.4Kbps The default network data of the setup Ethernet port (LAN port) are as follows: • IP address: 192.168.134.1 • Sub-network mask: 255.255.255.0 • User name: user • Password: user Important The Sagem Fax ATA 101S has two Ethernet ports (RJ45): • LAN provides access to the unit's setup via the manual setup method (see "See Installation and manual setup (via the Web setup interface)", page 3). • WAN provides access to the unit's automatic setup (see "See Automatic installation and setup (via TFTP)", page 8) and allows the unit to be connected to an IPBX, a VoIP gateway or an IP operator. User guide 1