Xerox 6180N DocuSP 61xx version 3.6 - Operator Guide - Page 100
Cut the wire carefully, leaving approximately 2 inches 50
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 100 highlights
Problem solving a. Using the wire cutters, slowly and carefully pull approximately 3 feet (1 meter) of wire out of the stitcher plug. b. The wire cutter tool needed to perform this procedure is located next to stitcher spool B, as shown in the lower left corner of figure 6-1. c. Cut the wire carefully, leaving approximately 2 inches (50 mm) of wire extending from the stitcher plug, as shown in figure 6-3. Figure 6-3. Cutting the wire 7. Insert the plug into the measuring bracket, as shown in figure 6-4. 6-12 DocuTech 61xx Operator Guide
Problem solving
6-12
DocuTech 61xx Operator Guide
a.
Using the wire cutters, slowly and carefully pull
approximately 3 feet (1 meter) of wire out of the stitcher
plug.
b.
The wire cutter tool needed to perform this procedure is
located next to stitcher spool B, as shown in the lower left
corner of figure 6-1.
c.
Cut the wire carefully, leaving approximately 2 inches (50
mm) of wire extending from the stitcher plug, as shown in
figure 6-3.
Figure 6-3. Cutting the wire
7.
Insert the plug into the measuring bracket, as shown in figure
6-4.