Xerox 6180N DocuSP 61xx version 3.6 - Operator Guide - Page 103
Customer Support Center directed tasks
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Problem solving Customer Support Center directed tasks The following tasks should be performed when a Customer Support Center Representative asks you to do so. Performing these tasks when requested may save you a visit from a Service Representative. Cleaning the processor sensors and the reflecting surfaces Cleaning the Q861 sensor Cleaning the Q861 sensor should be performed only when a Customer Support Center Representative asks you to do so. Perform the following when it is necessary to clean the Q861 sensor. 1. Open the processor doors. 2. Locate and raise the area 4 green handle until it locks into place, as shown in figure 6-6. Figure 6-6. Area 4 green handle 3. Locate the Q861 sensor, as shown in figure 6-7. 4. Place a dry cleaning pad on the sensor and move the pad left to right to clean the sensor, as shown in figure 6-7. DocuTech 61xx Operator Guide 6-15