Xerox 6180N DocuSP 61xx version 3.6 - Operator Guide - Page 81
Locating the binder tape knob
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Routine maintenance Figure 5-40. Locating the binder tape knob The knob is spring loaded and moves in increments to change the location of the binder tape. Each increment equals a change of 0.1mm, up or down, on the edge of the book. One full rotation of the knob is equal to 0.04 inch (1mm). 6. Pull the knob toward you to rotate it for the adjustment. 7. Adjust the tape position by performing one of the following steps: • Pull the knob and rotate it clockwise to move the tape toward the top edge of the book, as shown in figure 5-41. DocuTech 61xx Operator Guide 5-39
Routine maintenance
DocuTech 61xx Operator Guide
5-39
Figure 5-40. Locating the binder tape knob
The knob is spring loaded and moves in increments to
change the location of the binder tape.
Each increment
equals a change of 0.1mm, up or down, on the edge of the
book. One full rotation of the knob is equal to
0.04 inch
(1mm).
6.
Pull the knob toward you to rotate it for the adjustment.
7.
Adjust the tape position by performing one of the following
steps:
•
Pull the knob and rotate it clockwise to move the tape
toward the top edge of the book, as shown in figure 5-41.