Xerox 6180N DocuSP 61xx version 3.6 - Operator Guide - Page 80
Adjusting the binder tape registration
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Routine maintenance 11. Close the finisher doors. Adjusting the binder tape registration The binder tape knob is used to align the registration of the binder tape to the top edge of a bound book. This procedure has no effect on the length of the tape, but you should perform this procedure before adjusting the tape length. To adjust the length, refer to the on-line help. Perform the following steps to adjust the binder tape registration. 1. Ensure that the tape guides are clean and free of glue residue. Refer to the procedure, "Cleaning the binder," in this section. 2. Determine the adjustment amount for the top edge of the book. 3. Open the finisher doors. 4. Measure the distance between the top of the binder tape and the top of the book. 5. Locate the black binder tape knob on the front of the binder drawer. 5-38 DocuTech 61xx Operator Guide