Xerox 6180N DocuSP 61xx version 3.6 - Operator Guide - Page 134

Technical information Table 7-15. Binder satisfaction guide Stock Reliable stacking may be Less reliable stacking may expected be expected Suggested alternatives Set size limits Maximum collated: 125 sheets of substance 20 (75 g/m2) or equivalent thickness 125 sheets of substance 16 (60 g/m2) Minimum collated: 15 sheets of substance 20 (75 g/m2) (7 sheets with index covers) or equivalent thickness Consider stitching for set sizes smaller than 15 sheets (or equivalent thickness). Reduce the number of sheets to maintain a maximum set thickness of 0.5 inch (13 mm) when using heavier than substance 20 (75 g/m2) for main body or inserts. Maximum uncollated: 100 sheets of substance 20 (75 g/m2) Minimum uncollated: 15 sheets of substance 20 (75 g/m2) (7 sheets with index covers) or equivalent thickness Stacker capacity Delivers 12 sets inboard and 12 sets outboard To allow continuous run, unload outer stack before inner stack reaches capacity. Type or condition Xerographic bond paper in Slightly curled paper good condition Drilled paper Avoid the following: • Coated papers • Drilled stock with reinforced edges • Transparencies as inserts • Excessively curled paper • Never-tear paper Stock not defined here is included in the "Using various stocks" section in this guide. Table 7-16. Top tray satisfaction guide Stock Reliable stacking may be Less reliable stacking may expected be expected Suggested alternatives Size 8 x 10 inches to 11 x 17 Intermixed sizes inches (203 x 254 mm to 279 x 432 mm) Smaller or larger sizes cannot be used. 7-18 DocuTech 61xx Operator Guide