Xerox 6180N DocuSP 61xx version 3.6 - Operator Guide - Page 132

Technical information Stock Stacker capacity Type or condition Stock Size Weight Set size limit due to copy paper weight Stacker capacity Table 7-13. Stacker capacity Reliable stacking may be Less reliable stacking may expected be expected Suggested alternatives Unfinished sheets: 3300 sheets, substance 16 (60 g/m2) To allow a continuous run, unload outer stack before inner stack reaches capacity. 3000 sheets, substance 20 (75 g/m2) 2500 sheets, substance 24 (90 g/m2) 1875 sheets, substance 32 (120 g/m2) 1360 sheets, substance 110 (200 g/m2) Xerographic bond paper in Slightly curled paper good condition Drilled paper Do not use excessively curled paper. Transparencies must contain some opaque sheets to avoid finisher jams. Stock not defined here is included in the "Using various stocks" section in this guide. Table 7-14. Stitcher satisfaction guide Reliable stacking may be Less reliable stacking may expected be expected Suggested alternatives 8 x 10 inches to 9 x 14 inches (203 x 254 mm to 229 x 356 mm) Use the top tray for larger sizes Substance 16 to 110 (60 to 200 g/m2) Weights outside the limits shown are not recommended. Collated: Up to 65 sheets of substance 20 (75 g/m2) or 0.28 inch (7 mm) thick sets Uncollated: 50 copies maximum per stitch 0.28 inch (7 mm) thick sets Collated: Up to 70 sheets of substance 20 (75 g/m2) Reduce the paper weight to enable stitching more sheets per collated set. Check the stitch quality. Stacker capacity adjusts automatically to suit various set sizes To allow a continuous run, unload outer stack before inner stack reaches capacity. 7-16 DocuTech 61xx Operator Guide