Xerox 6180N DocuSP 61xx version 3.6 - Operator Guide - Page 46
Load Xerox paper with
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Routine maintenance 2. When the green "Ready to open" light comes on, pull the tray out until it stops. 3. Move the rear and side guides away from the paper stack, as shown in figure 5-3. Figure 5-3. Moving the guides NOTE: To load the paper correctly, refer to the label located on the inside panel at the front of the paper tray. For information on loading different types of stock, refer to the "Technical information" chapter in this guide. Remove any damaged sheets from the top of the stack. 4. Load the required paper into the paper tray. Load paper with the curl side facing down. Load Xerox paper with the package wrapper seam side facing up. NOTE: When loading drilled paper, be sure to fan the edge where the holes are located. 5. Position the stack against the front left corner of the tray, as shown in figure 5-4. This is indicated by the green arrow on the bottom of the tray. 5-4 DocuTech 61xx Operator Guide