Xerox 6180N DocuSP 61xx version 3.6 - Operator Guide - Page 83
Adjusting the heavy paper levers
UPC - 095205425307
View all Xerox 6180N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Routine maintenance Adjusting the heavy paper levers This system can handle a variety of papers. Some heavier weight paper or longer paper may cause skewing problems. Adjust the heavy paper levers to prevent this skewing. Adjust the heavy paper levers when you have skewed prints. Perform the following steps to adjust the heavy paper levers. 1. Open the right door of the processor. 2. Open the left door of the processor. 3. Locate the black heavy paper levers behind area 4 and area 2. 4. Raise the heavy paper levers. a. Pull the silver latch release toward you. b. Raise the left and right black levers to the vertical position, as shown in figure 5-43. Figure 5-43. Raising the levers 5. Run the print job. 6. When the print job has been completed, lower the heavy paper lever. a. Pull the silver latch release toward you. DocuTech 61xx Operator Guide 5-41